Support Unit EF Supported-side rectangular type

Model No. Shaft
diameterd
L B H h B1 H1 P V d1 62 a Use bearings Use buckle
EF06 6 12 42 25 13 18 20 30 17 5.5 9.5 11 B606ZZ STWN • S6
EF08 15 52 32 17 25 26 38 6.6 11
EF10 8 20 70 40 22 36 21 52 22 9 巳608ZZ STWN * S8
43 25 24
EF12 10 41 23 22 26 B6000ZZ STWN • S10
43 25 24
EF15 15 80 46 26 41 21 60 32 11 B6002ZZ STWN * S15
48 28 23
50 *30 25
EF20 20 26 95 58 56 30 75 47 B6204ZZ STWN * S20
EF25 25 30 105 68 35 66 25 85 52 B6205ZZ STWN . S25

15

Structure and Features

The Support Unit comes in six types: models EK, FK, EF, and FF, which are standardized for
standard-stock Ball Screws provided with finished shaft ends, and models BK and BF, which
are standardized for ball screws in general.

The Support Unit on the fixed side contains a JIS Class 5-compliant angular bearing provided with
an adjusted preload. The miniature type Support Unit models EK/FK 4, 5, 6 and 8, in particular,
incorporate a miniature bearing with a contact angle of 45゜developed exclusively for miniature
Ball Screws. This provides stable rotation performance with high rigidity and accuracy.
The Support Unit on the supported side uses a deep-groove ball bearing.
The internal bearings of Support Unit models EK, FK and BK contain an appropriate amount of
lithium soap-group grease that is sealed with a special seal. Thus, these models are capable of
operating over a long period.

●Uses the Optimal Bearing
To ensure rigidity balance with the Ball Screw, the Support Unit uses an angular bearing (contact angle: 30゜; DF configuration) with high rigidity and low torque. Miniature Support Unit
models EK/FK 4, 5, 6 and 8 are incorporated with a miniature angular bearing with a contact
angle of 45゜developed exclusively for miniature Ball Screws. This bearing has a greater contact angle of 45゜and an increased number of balls with a smaller diameter. The high rigidity
and accuracy of the miniature angular bearing provides stable rotation performance.

●Support Unit Shapes
Square and round shapes are available for the Support Unit to allow selection according to the
intended use.

●Compact and Easy Installation
The Support Unit is compactly designed to accommodate the space in the installation site. As
the bearing is provided with an appropriately adjusted preload, the Support Unit can be assembled with a Ball Screw unit with no further machining. Accordingly, the required man-hours in
assembly can be reduced and the assembly accuracy can be increased.

●Compact and Easy Installation
The Support Unit is compactly designed to accommodate the space in the installation site. As
the bearing is provided with an appropriately adjusted preload, the Support Unit can be assembled with a Ball Screw unit with no further machining. Accordingly, the required man-hours in
assembly can be reduced and the assembly accuracy can be increased.


  • Support Unit EF Supported-side rectangular type Related Video: